Creating a 3D object with the command Extrud Pad

Basically, in making the 3D object is to provide a thickness value in a field objec 2d, where the third axis of ordinate each given a value. At this opportunity I will try to make a 3d object using the command extrud pad on Autocad application. The first thing I did was I had prepared a 2d object this time I have made ​​my elbow 2d which will be concatenated into a 3d object. You can view the video tutorial below:

Read More

Create a 3D Object with the value of Z axis Giving

In making the 3D object, In this tutorial, I will create a 3D object that is made as if visible solid. Here I use a few commands at the command Autocad Change>> Elev. Where Two 2D Object field that we have we will give the value of Z axis and I will connect the two areas with a command line to produce 3D objects. Want to clearly let's look at this video tutorial:

Read More

Creating 2D Images Looks Solid

In making a Figure 2d for the first solid look you have to do is: you must give a value on the axis Z axis on the image you created, or you must change the value of elevation in the image that you created by typing in the comment line: change> > selec object>> Properties>> Elev. then you are asked to give value to your needs. After that you can see results by using the tool bar VIEW>> Isometric View, then your 2d image object will be visible already have a value of Z axis and when at play with the 3D Orbit command then it will look like a 3D object. But it was not completed until here. You still have to make a 2D object that you have created looks solid. how ...? let us continue.

Activate a command on the Tool Bar Surface>> 2D Solid. Before you use the 2D Solid command, First you must change mengaaktifkan ucsnya with UCS command>> 3 Point UCS.

Click on the third corner of the object that you created Facenya looks solid, solid 2D and switch command, click on the object. So the 2D object that you have created will look like a solid 3D object. In this process you do use the 2D Solid command only gives the appearance efeck without giving thiknes value. You can view this tutorial, the video tutorial below.

Read More

Make Span Elbow

In making the stretch of Elbow is a few steps that must be d prepared. For those of you who work on a Vendor who is engaged in steel construction atu piping installation, these tutorials can help you in completing your job. Let's try to make: first you have to prepare is a picture Elbow (free choice of its dimensions). Then you are asked to activate the Line command, which is useful as a divider line at the elbow when you divide it into several parts which will we take one sample from the elbow that we already do.

In this division we use the Array command, then you are asked to enter the value you see in the video try this tutorial

Read More

Changing Objeck 3D into 2D Objeck

Tips & tricks Transform 3D to 2D Object

This time I will try to provide tips & tricks on how to change objeck 3D into 2D objeck

first you have to do is:

1. Make any 3D objeck you should be able to expand with the Align command

2. Try on every spread objeck 3d, you have to prepare the sample one side of the 3d object that you want to expand it.

3. When using the Align command, you've got to understand the logic in what direction you want the 3d objeck spread.

4. At prosses pembentangkan, you must carefully mentukan points objeck 3d points from which you created.

5. Usahan objeck objeck 3d 3d you are not a solid.

6. Concentration and do not despair, and keep trying.




Maybe it was just tips & tricks that I can give to the readers. Hopefully helpful

Read More

Convert 3D to 2D

In making the stretch of the 2D images into 3D images, a lot of stage stage needs to be done. in this case I will try to share a little experience to the reader how to apply by using AutoCAD program.in this case I will try to create images of 3D shapes. here I will try to make Reducer which has two sides that has a different shape is a circle (circle) and square shape (rectangle). What should you do first is turn on your Autocad program, create a new worksheet with mengkilik New templet. Create a 3D image using the command reducer rectangle and circle, you are free to determine its dimensions. Once you have successfully created both in the center position, try using the command fox elivasinya Change>> ELV. Then try to help you make a line on the circle you created a line connecting the center circle ketepi, then type the command Array help lines are made of 24 lines with a point on the center circle pointnya. After successfully change the view (the view) in the image area you become isometric view to enable the tool bar VIEW. it will show sebuag 3d view, try to connect the two fields (rectangle & circle) by using the command line. connecting point of the rectangle with help lines that you have created earlier in objeck circle. After you successfully make it, then akantampaklah a 3d reducer that you created. Upss .... Finish yet, you still have to change into the form 2d. To be able to change the reducer is you have to take one side of the reducer 3d that you created. why only one side? because the three other sides at the same reducer.In changing the objec 3D into 2D objec you can use the Align command, how ? Let us try, first prepare one side of the reducer objeck that you created by activating the isometric view, and then you try to make a rectangle area by using the command that will berfugsi as field to help membentagkan objec 3d. make rctangle with sizes larger than the field of 3d that you created, make it 3d field you are in the field of the rectangle. Align type the command>> selec Objeck. click on one corner point twice, and then click another point and point to the rectangle corner point that you have created before, you are free to determine its point, after the completion of this prosess then you will see 3d reducer that you created has become objeck stretch of 2d. You just make the mensinya. Easy is not ..... You are still confused Let's look at the video tutorial.

Selamat Mencoba. Good luck.

Read More